We have tested both the Aiper Scuba X1 Pro and the Beatbot AquaSense 2 Ultra in real pools, measured their suction at the intake, and lived with the filtration and daily routine each one requires. This comparison brings those results together so you can see the real-world trade-offs without relying on the numbers printed on either box.
Both use cordless power, so this matchup turns on measured pull, filtration, coverage, automation, and value.
The short answer: we recommend skipping both. Neither robot earned a buy call in our pool testing. If you want our closest recommended alternative for what you are shopping here, look at the Dolphin Premier (2.2 PSI). If you are strictly choosing between these two models, the Beatbot AquaSense 2 Ultra is the lesser compromise (pulling 1.6 vs 1.0 PSI on our gauge).
Quick Answer
Our honest call is to skip both robots and buy the Dolphin Premier instead. Our #1 overall pick near this price bracket: jumps from 1.0–1.6 PSI to a leaderboard-leading 2.2 PSI, includes Multi-Media NanoFilters plus a leaf bag, and automates daily cleaning on a weekly timer. If your priorities lean more toward modern pools with shelves or steps and owners who want app control, also look at the Dolphin Quantum Pro (1.9 PSI).
If you are already committed to one of these two, Beatbot AquaSense 2 Ultra takes the narrow edge (pulling 1.6 vs 1.0 PSI on our gauge). The Aiper Scuba X1 Pro is only worth considering for Aiper buyers who need its specific added sensors rather than the strongest value.
Our calls in the full reviews are Not recommended for the Aiper Scuba X1 Pro and Not recommended for the Beatbot AquaSense 2 Ultra. Those calls matter here: PSI is the first round, not the entire verdict.
Suction Power: 1 PSI vs 1.6 PSI
On our hydro manometer, the Aiper Scuba X1 Pro measured 1 PSI and the Beatbot AquaSense 2 Ultra measured 1.6 PSI. That gives the Beatbot AquaSense 2 Ultra a 0.6 PSI advantage, or about 60% more intake pressure than the lower reading.
We measure pressure directly at the intake with the same gauge and pool setup. That is different from manufacturer flow-rate claims in gallons per hour: GPH describes water movement, while PSI shows how hard the intake pulls on debris. Cordless results are recorded at full charge. Our complete pool-robot suction test explains the method and shows where both robots sit on the full board.
The number needs context. It is well built, straightforward to operate, and covers the expected pool surfaces. It packs the widest Beatbot feature list and posts 1.6 PSI on a full charge. The stronger gauge result gets this round, though intake pressure alone cannot make up for a filter that lets fine debris escape or a routine that makes you handle the robot every day.
Filtration and Debris Handling
The Aiper Scuba X1 Pro uses mesh basket for routine debris. The Beatbot AquaSense 2 Ultra uses small dual-layer mesh basket.
We give the filtration edge to the Beatbot AquaSense 2 Ultra. Our comparison favors fine-particle capture, usable debris capacity, easy cleaning, and whether the better filter is included rather than sold as an upgrade.
For leaves, capacity and intake design matter. For pollen, silt, and the haze that dulls otherwise clear water, the filter media matters more. A basic mesh screen can look clean after a run while still passing the smallest material back into the pool.
Automation and Daily Work
The Aiper Scuba X1 Pro is cordless. App setup with underwater control gated behind a separate communications accessory. The Beatbot AquaSense 2 Ultra is cordless. Many app features, but underwater connection and daily charging remain limitations.
Because both are cordless, neither is truly set-and-forget. Compare runtime and app features, but plan on retrieving, charging, and redeploying either robot between cycles.
We score automation as a tie.
Coverage and Pool Fit
For the Aiper Scuba X1 Pro, our review found floor, walls, and waterline in cordless cycles. The Beatbot AquaSense 2 Ultra is built for floor, walls, waterline, and surface-skimming modes.
The Beatbot AquaSense 2 Ultra wins the coverage round on the breadth of surfaces and pool situations it can handle.
Surface coverage on a spec sheet only goes so far if suction fades or the filter misses fine dust. Match the robot’s reach to your pool size, and weigh how often you are willing to handle the unit to keep those surfaces clean.
Value: Performance for the Money and Time
Our value take on the Aiper Scuba X1 Pro: The middle trim costs more than the base model but tested lower on suction. For the Beatbot AquaSense 2 Ultra: The most expensive Beatbot while matching the base model's canonical full-charge PSI.
We score value evenly. In that case, your pool fit should break the tie.
Value is not the same thing as the lowest checkout price. We count cleaning power, filtration, how many surfaces the robot covers, and how often you have to retrieve or charge it. A cheaper robot that leaves you vacuuming behind it is not a bargain, and an expensive robot only earns its price when its extra capability solves a real problem in your pool.
What to Buy Instead
Because both the Aiper Scuba X1 Pro and Beatbot AquaSense 2 Ultra earned a skip in our testing, compare them directly against any pick from our Best Robotic Pool Cleaners of 2026 list below — starting with our closest match, the Dolphin Premier:
| Category | Scuba X1 Pro | AquaSense 2 Ultra | Premier (Buy Instead) |
|---|---|---|---|
| Our review call | Skip | Skip | Recommended |
| Measured suction | 1.0 PSI (full charge) | 1.6 PSI (full charge) | 2.2 PSI (constant corded) |
| Filtration | Mesh basket for routine debris | Small dual-layer mesh basket | Multi-Media filtration with NanoFilters, standard cartridges, and the only leaf bag in this group |
| Automation | App setup with underwater control gated behind a separate communications accessory | Many app features, but underwater connection and daily charging remain limitations | Weekly timer on the power supply; no daily charging |
Our #1 overall pick near this price bracket: jumps from 1.0–1.6 PSI to a leaderboard-leading 2.2 PSI, includes Multi-Media NanoFilters plus a leaf bag, and automates daily cleaning on a weekly timer.
You can also read our direct head-to-head breakdowns for Aiper Scuba X1 Pro vs Dolphin Premier and Beatbot AquaSense 2 Ultra vs Dolphin Premier, or look at the Dolphin Quantum Pro (1.9 PSI) if your pool leans more toward modern pools with shelves or steps and owners who want app control.
If You Still Pick Between These Two
- Lesser compromise — Beatbot AquaSense 2 Ultra: Takes the head-to-head edge (pulling 1.6 vs 1.0 PSI on our gauge). It packs the widest Beatbot feature list and posts 1.6 PSI on a full charge.
- Narrow case for Aiper Scuba X1 Pro: Only relevant for Aiper buyers who need its specific added sensors rather than the strongest value. It is well built, straightforward to operate, and covers the expected pool surfaces.
- Why we skip both overall: Beatbot AquaSense 2 Ultra — Its tiny basket, daily battery routine, and flagship price are difficult to justify. Aiper Scuba X1 Pro — At 1.0 PSI, it is the weakest X1 in our data and still requires hours of daily recharging.
Final Verdict
Skip both — buy the Dolphin Premier instead. Beatbot AquaSense 2 Ultra edges out Aiper Scuba X1 Pro in a forced comparison (pulling 1.6 vs 1.0 PSI on our gauge), but both carry a Not recommended call in our reviews. The Dolphin Premier (2.2 PSI) is the closest recommended robot to buy instead.
Read the complete Aiper Scuba X1 Pro review and Beatbot AquaSense 2 Ultra review for every test photo, setup detail, and long-form ownership note. You can also return to all pool-robot comparisons to see any other matchup from the 19 cleaners in our test set.
