5/5Top suction spots are corded
Compare pool robots with numbers you can use.
Same pool. Same hydro manometer. Real weeks of use. Filter the results, inspect the chart, and see which cleaners actually earn their price.
- 19
- robots on one gauge
- 171
- direct matchups
- 0
- spec-sheet scores

2.75×Spread from strongest to weakest
1.6 PSIBest cordless result, at full charge
14 vs 1Weekly touches: cordless vs timed corded
One gauge. Every robot. No marketing math.
PSI measured at the intake in the same pool. Higher means more pulling force where debris enters the robot.
| Rank | Robot | Power | Tested PSI (highest to lowest) | Intake path | Review |
|---|---|---|---|---|---|
| #1 | Dolphin Premier | Corded | 2.2 PSI | 9.5 in. dual | |
| #2 | Clear UV | Corded | 2.09 PSI | Widest single port tested | |
| #2 | Clear S | Corded | 2.09 PSI | Wide single port | |
| #4 | Dolphin Sigma | Corded | 2.0 PSI | 10 in. dual | |
| #5 | Dolphin Quantum Pro | Corded | 1.9 PSI | 7 in. | |
| #6 | Dolphin Explorer E70 | Corded | 1.7 PSI | About 6.5 in. | |
| #7 | Beatbot AquaSense 2 | Cordless | 1.6 PSI | About 6–7 in. | |
| #7 | Beatbot AquaSense 2 Ultra | Cordless | 1.6 PSI | About 6.5 in. | |
| #9 | Dolphin Cayman | Corded | 1.5 PSI | 5 in. | |
| #9 | Dolphin Escape | Corded | 1.5 PSI | About 5 in. | |
| #9 | Polaris PCX iQ | Corded | 1.5 PSI | About 6–8 in. | |
| #9 | Dolphin Nautilus CC Plus | Corded | 1.5 PSI | Dual intake ports | |
| #9 | Beatbot AquaSense 2 Pro | Cordless | 1.5 PSI | About 6.5 in. | |
| #14 | Aiper Scuba X1 Pro Max | Cordless | 1.3 PSI | About 6–7 in. | |
| #15 | Aiper Scuba X1 | Cordless | 1.2 PSI | About 6–7 in. | |
| #16 | Polaris VRX iQ+ | Corded | 1.0 PSI | About 6–8 in. | |
| #16 | Aiper Scuba X1 Pro | Cordless | 1.0 PSI | About 6–7 in. | |
| #18 | Dolphin Nautilus CC | Corded | 0.8 PSI | About 6 in. | |
| #18 | Polaris Freedom | Cordless | 0.8 PSI | About 6 in. |
No robots match that search.
Cordless robots were measured at full charge. Suction is one part of the decision; intake width, filtration, coverage, and daily handling matter too.

Three numbers tell more than a page of specs.
A strong robot needs pull, coverage, and the ability to run without turning you into its full-time charging dock.
- 01PSI is pulling force
We measure vacuum pressure where leaves, sand, and silt actually enter.
- 02Intake width is coverage
A wider path captures more on each pass and leaves fewer escape routes.
- 03Touches are the hidden cost
A timer-equipped corded robot can mean one rinse a week instead of daily charging.
Three shortlists from the data
Not three versions of “best.” Three different jobs, with a clear reason behind each pick.



Every robot against every other robot.
All 171 two-robot combinations from our 19 reviewed cleaners are linked below. Pick two robots or search the complete library.
Choose any two tested robots
Select two different robots.











































































































































































No comparison matches that search.
Start with the robots we would buy.
Our ranked guide turns all of the measurements, filtration tests, and weeks of use into a simple shortlist.