We have tested both the Aiper Scuba X1 Pro Max and the Dolphin Nautilus CC in real pools, measured their suction at the intake, and lived with the filtration and daily routine each one requires. This comparison brings those results together so you can see the real-world trade-offs without relying on the numbers printed on either box.
This is also a corded-versus-cordless decision: one prioritizes continuous power and scheduling, while the other removes the cable but adds charging.
The short answer: Dolphin Nautilus CC takes the head-to-head edge. It removes daily charging from the equation and covers the core floor-and-wall job. Aiper Scuba X1 Pro Max only makes sense for Aiper loyalists who want the broadest X1 feature set. Because neither robot is in our top recommendation tier, we also suggest cross-shopping the Dolphin Sigma (2.0 PSI) before you buy.
Quick Answer
Between these two, pick the Dolphin Nautilus CC for strict budgets and light debris where basic floor and wall cleaning is enough. It is the more complete option across the measurements and ownership factors we tested.
Consider the Aiper Scuba X1 Pro Max only if you specifically prioritize Aiper loyalists who want the broadest X1 feature set — and compare both against our recommended Dolphin Sigma (2.0 PSI) before checking out.
Our calls in the full reviews are Not recommended for the Aiper Scuba X1 Pro Max and Decent, but there are better buys for the Dolphin Nautilus CC. Those calls matter here: PSI is the first round, not the entire verdict.
Suction Power: 1.3 PSI vs 0.8 PSI
On our hydro manometer, the Aiper Scuba X1 Pro Max measured 1.3 PSI and the Dolphin Nautilus CC measured 0.8 PSI. That gives the Aiper Scuba X1 Pro Max a 0.5 PSI advantage, or about 63% more intake pressure than the lower reading.
We measure pressure directly at the intake with the same gauge and pool setup. That is different from manufacturer flow-rate claims in gallons per hour: GPH describes water movement, while PSI shows how hard the intake pulls on debris. Cordless results are recorded at full charge. Our complete pool-robot suction test explains the method and shows where both robots sit on the full board.
The number needs context. It is the strongest X1 model on our gauge and adds broad coverage with an easy top-load basket. It removes daily charging from the equation and covers the core floor-and-wall job. The stronger gauge result gets this round, though intake pressure alone cannot make up for a filter that lets fine debris escape or a routine that makes you handle the robot every day.
Filtration and Debris Handling
The Aiper Scuba X1 Pro Max uses top-loading mesh basket with a fabric-style fine layer. The Dolphin Nautilus CC uses basic mesh basket with no nanofilter option.
We give the filtration edge to the Aiper Scuba X1 Pro Max. Our comparison favors fine-particle capture, usable debris capacity, easy cleaning, and whether the better filter is included rather than sold as an upgrade.
For leaves, capacity and intake design matter. For pollen, silt, and the haze that dulls otherwise clear water, the filter media matters more. A basic mesh screen can look clean after a run while still passing the smallest material back into the pool.
Automation and Daily Work
The Aiper Scuba X1 Pro Max is cordless. App setup, but underwater control requires the separate HydroComm accessory. The Dolphin Nautilus CC is corded. Simple corded start button without a weekly timer.
That power difference changes the ownership routine. The corded robot can keep full power through the cycle and run from a schedule when its controls support one. The cordless robot removes the floating cable, but it must come out of the water to recharge. For frequent cleaning, that usually means deploying and retrieving it every day.
The automation round goes to the Dolphin Nautilus CC.
Coverage and Pool Fit
For the Aiper Scuba X1 Pro Max, our review found floor, walls, waterline, and surface-skimming modes. The Dolphin Nautilus CC is built for floor and wall cleaning for standard pools.
The Aiper Scuba X1 Pro Max wins the coverage round on the breadth of surfaces and pool situations it can handle.
This is where the runner-up can still be the smarter fit for specific pools. A compact pool does not benefit from paying for reach it cannot use, while a pool with a sun shelf, long waterline, or heavy leaf load can expose the limits of a simpler machine quickly.
Value: Performance for the Money and Time
Our value take on the Aiper Scuba X1 Pro Max: Feature-rich and attractive, but expensive for its measured cleaning performance. For the Dolphin Nautilus CC: A basic entry point, but stronger and smarter options cost only a little more.
The value edge goes to the Dolphin Nautilus CC.
Value is not the same thing as the lowest checkout price. We count cleaning power, filtration, how many surfaces the robot covers, and how often you have to retrieve or charge it. A cheaper robot that leaves you vacuuming behind it is not a bargain, and an expensive robot only earns its price when its extra capability solves a real problem in your pool.
Recommended Upgrade to Cross-Shop: Dolphin Sigma
Neither model in this comparison sits in our top recommendation tier. Before buying, compare them against the Dolphin Sigma (2.0 PSI): Closest smart-flagship alternative: boosts suction from 0.8–1.3 PSI to 2.0 PSI across a 10-inch dual intake, includes top-load pleated NanoFilters, and keeps full underwater Wi-Fi app control with a 3-year warranty. See our direct matchups for Aiper Scuba X1 Pro Max vs Dolphin Sigma and Dolphin Nautilus CC vs Dolphin Sigma.
Which One Should You Buy?
- Head-to-head pick — Dolphin Nautilus CC: Best here for strict budgets and light debris where basic floor and wall cleaning is enough. It removes daily charging from the equation and covers the core floor-and-wall job.
- When Aiper Scuba X1 Pro Max fits: Only for Aiper loyalists who want the broadest X1 feature set. It is the strongest X1 model on our gauge and adds broad coverage with an easy top-load basket.
- Know the main drawback: Dolphin Nautilus CC — Its 0.8 PSI reading, basic mesh, and missing timer put it at the bottom of the corded field. Aiper Scuba X1 Pro Max — Its 1.3 PSI, long recharge, heavy body, and paid connectivity add-on undercut the flagship price.
Final Verdict
Dolphin Nautilus CC takes this head-to-head. Dolphin Nautilus CC wins this head-to-head. It removes daily charging from the equation and covers the core floor-and-wall job. Aiper Scuba X1 Pro Max remains the better fit for Aiper loyalists who want the broadest X1 feature set, while the Dolphin Sigma is our top-rated step-up near this class.
Read the complete Aiper Scuba X1 Pro Max review and Dolphin Nautilus CC review for every test photo, setup detail, and long-form ownership note. You can also return to all pool-robot comparisons to see any other matchup from the 19 cleaners in our test set.
